Leak detectors can prevent many problems, so proper maintenance is very necessary. Carefully following the instructions below will reduce the failure and increase the life of the instrument. Always turn off the power before replacing the probe, otherwise it may result in a slight electric shock!
Probe Cleaning: Use the supplied protective cover to prevent dust, moisture, and grease from blocking the probe. Disable this instrument when no guard is attached. Before using this instrument, check that the probe and the protective cover are free of dust or grease.
1. Pull off the protective cover.
2. Clean the protective cover with industrial towels or compressed air.
3. If the probe itself is dirty, it can be immersed in a mild detergent like alcohol for a few seconds and then cleaned with compressed air or industrial towel. Never use solvents like gasoline, turpentine, mineral oil, etc. because they will remain on the probe and reduce the sensitivity of the instrument.
Probe replacement: The probe will eventually fail and need to be replaced. Because the probe life is directly related to the conditions and frequency of use, it is difficult to predict the exact replacement time. When alarming or unstable in clean, clean air, the probe should be replaced.
Replace the probe step is 1. Make sure the instrument is turned off. Unscrew the old probe counterclockwise. Rotate the spare probe provided in the box clockwise.
Dear visitors: Thank you for visiting our website. Your current page is a halogen leak detector product. If you are interested in this product, you are warmly reminded that you can call our service hotline to learn more about related products. We will do our best to serve you.
Stearic acid is widely used in the manufacture of PVC plastic pipes, plates, profiles, and films. It is a PVC heat Stabilizer with good lubricity and good light and heat stability. In plastic PVC pipes, stearic acid helps prevent "coking" during processing. It is an effective thermal stabilizer added in the processing of PVC films, and can prevent finished films caused by excessive exposure to sulfides.
Mainly used to produce stearates: sodium stearate, magnesium stearate, calcium stearate, lead stearate, aluminum stearate, cadmium stearate, iron stearate, potassium stearate.
Widely used to make cosmetics, plastic cold-resistant plasticizers, mold release agents, stabilizers, surfactants, rubber vulcanization accelerators, waterproofing agents, polishing agents, metal soaps, metal mineral flotation agents, softeners, pharmaceuticals and others Organic chemicals.
In addition, it can also be used as a solvent for oil-soluble pigments, a crayon slip agent, a wax paper polish, and an emulsifier for glyceryl stearate.
The product is used as a lubricant, defoamer and food additives in the food industry as a raw material for glyceryl stearate, sorbitan stearate, and sucrose esters. Used as the raw material of additives and the raw material of daily chemical products.
Stearic acid is widely used in the manufacture of PVC plastic pipes, plates, profiles and films. It is a PVC heat stabilizer with good lubricity and good light and heat stabilization. In plastic PVC pipes, stearic acid helps prevent "scorching" during processing. It is an effective heat stabilizer added in the processing of PVC film, and it can also prevent the finished film caused by exposure to sulfide. Discoloration.
Stearic Acid,Industrial Stearic Acid,Chemical Stearic Acid,Agent Stearic Acid
Henan Shunbang Chemical Industry CO.,Ltd , https://www.sbcpe.com