In recent years, a revolutionary new force in industrial development—the upgrading of Industry 4.0 marked by intelligence—is igniting a new round of industrial transformation competitions around the world. In China, coincident with the industrial transformation and upgrading, economic growth is looking for a special node of new kinetic energy, this impulse is particularly prominent.
In 2016, with more than ten policies intensively introduced in the field of smart manufacturing, the transformation of China's manufacturing industry toward smart manufacturing is a general trend. More and more companies, like Wanli Tires, have embraced smart manufacturing initiatively and started to use it in large numbers. Cloud computing, big data, robotics and other related technologies.
On July 20 this year, the State Council issued the "New Generation Artificial Intelligence Development Plan" and proposed a "three-step" strategic plan for China's new generation of artificial intelligence. It clearly stated that by 2030, China will become the world's leading artificial intelligence innovation center. The scale of the artificial intelligence core industry exceeds 1 trillion yuan, driving the scale of related industries to exceed 10 trillion yuan.
Under the policy of blowing winds, China's smart manufacturing is forming four major industrial clusters. According to the 2016-2017 China Smart Manufacturing Annual Development Report, China is forming four major industrial clusters in the Pearl River Delta, Yangtze River Delta, Bohai Rim and Midwest, which will further enhance the level of smart manufacturing in various regions.
According to the White Paper of the Robotics Industry 2016, as of October 2016, more than 50,000 new industrial robots have been added in the Pearl River Delta and Yangtze River Delta regions, an increase of more than 30% over the same period of 2015. It is expected that robots in these regions will be available in the next few years. The growth rate of the quantity will still be maintained at more than 30%.
Take the Pearl River Delta as an example. As the inflection point of the demographic dividend fades, "machine substitution" has not only become the "new normal" for the Pearl River Delta to solve the difficulty of recruiting workers, but also means that a promising new industry is gradually emerging.
“On the production line, several workers are doing the final packaging. Their packaged products are firmly gripped and neatly placed by a robot arm that is about 3 meters high. The AGV car with music is on the channel of the workshop. (Automatic guided transport vehicles) The products are driven in an orderly manner. If someone blocks the way, the car will automatically stop and issue an alert.†This is a reporter from the “First Financial Daily†who saw the factory in Shunde, Foshan, Guangdong, China. The scene.
In recent years, Foshan, Guangdong, home appliances, ceramics, hardware, mold and other industries have an important part in China's manufacturing, has become one of the Pearl River Delta manufacturing city. It can be said that the development of the artificial intelligence industry, especially the production and application of robots, is of great significance to Foshan.
Nowadays, in the face of rising costs, the manufacturing industry in the Pearl River Delta region is undergoing marked differentiation: the high-end manufacturing industry pursues intelligent production through the organic combination of automation and information technology to reduce manual investment and increase production efficiency; In order to reduce the production cost, the remaining factories will tend to be miniaturized, and serve as an acceptance window to meet the needs of customers for R&D proofing.
In stark contrast to the increase in investment in high-end manufacturing industries and improvement in production efficiency, in order to reduce production costs and maintain profit margins, the trend of contraction in the low-end and middle-end manufacturing industries in the Pearl River Delta has become increasingly evident. Industry insiders said that the appearance of factory relocation seems to be an active act, but it is actually a passive choice, indicating that companies lack core competitiveness. Therefore, it is fundamental to the survival of the mid-to-low-end manufacturing enterprises in the Pearl River Delta to upgrade their own innovation capabilities and achieve a transformation from low-end to high-end.
Fin Die consists of draw satation, pierce extrude station, reflare satation, edge trim, slit, dual feed (fixed and movable), and cutoff station. The fin surface is accomplished in the last draw station by removable plate, The die stays in the press during plate changes. The die further features the latest version of draw station adjustment. Each station can be individual adjusted using a dial adjustment gauge. The draw dials are calibrated, as is the reflare adjustment dial. Our digital position indicator design will be included on all draw and reflare dials, which greatly improves the visibility and ease of adjustment.
These features allow for extremely fast changes from one collar height setting to another. We also will furnish ball bushings in the main die set as serviceable pillar style bearings. Air is used in the pierce extrude station to clear slugs and scrub the walls of the extrude bushings. Air is also used in the edge trim station to eject scrap. PIERCE PUNCH LUBRICATION SYSTEM (STANDARD) We provide the piece punch lubrication system to extra protect the punches and dies.
This features a reservoir and necessary plumping to induce air and lubricant through the pierce punches automatically. This will assist to remove the round pierced Slug plus lubricate the punch during entry and withdraw from the pierce dies. This is especially necessary when running any type of evaporative fin stock lubricant. A low level switch and pilot light indicator on the touching screen are designed. QUICK DIE CHANGE (STANDARD) Our fin line is designed and manufactured for rapid die exchange. One man with two hours will be enough for skilled operator. Nearly all changes are of a fixed position nature to virtually eliminate adjusting things to get the dies running with the line. SEPARATE SLIT ADJUSTMENT (STANDARD) A set of slit design upper blades can be positioned from 1,2,3,4,5,6,7 and more as Fin Dies sepecification SPEICAL TOOL STEEL (TOOLING) The die will be designed in tooling items named ASP30, for example, Punches, Die inserts, Slitter blades and other blades.
Fin Dies
Fin Die, Fin Dies, Fin Mould, Mechanical Fin Dies
Satis Products Co., Ltd. , https://www.satismachinery.com